Textile Soaping Agent

उत्पाद वर्णन

Dispersol 20 XT Plus

1) Product character

Dispersol 20 XT Plus is a specialized formulated liquid low foaming high performance soaping off agent for fast dyeings & prints of reactive dyes. It also Suitable for application in high turbulence liquor machines such as jets, soft flows etc. It results in reduced soaping cycle with increased production and significantly reducing dye house cost. When used after dyeing it serves dual purpose of neutralization and soaping, where by acetic acid is completely avoided.

2) Properties

Ionic character : Amphoteric

App. (As such) : Clear colorless liq.

pH (As such) : 41

Solubility : Miscible with water

Chemical Composition : Polymer compound

3) Application

3.1) Recommended Soaping Cycle

3.1.1) After dyeing drain bath

3.1.2) Cold wash / Rinse for 10 min and neutralizer with acetic acid OR Over flow wash for 10 min. Drain bath

3.1.3) Run with Dispersol 20 XT Plus = 0.5 2.0gpl 10 min at normal temp, increase temp to boil, soap for 15 20 min. at 80C to boil

3.1.4) Soap with Dispersol 20 XT Plus = 0.5 2.0gpl for 15 min. 80C to boil. Drain bath (Optional)

3.1.5) Hot wash for 10 min. Drain bath

3.1.6) Hot wash for 10 min. (Optional depending on color removal in last bath)

*Second soaping is recommended for very heavy shades only.

4) Safe use and handling

Good hygienic and industrial practices should be followed and, when employed as recommended, Dispersol 20 XT Plus will not present any hazard. However, prolonged skin contact with the neat product should be avoided and any splashes on the skin should be washed off with water. The information herein is, to the best of our knowledge, correct and complete. It is based not only on the work in our laboratory but also on the reported results of other workers in this field. It is offered without guarantee of specific properties and no patent liability is assumed. No liability can be accepted for any loss, injury or damage resulting from its use.